Pomsare 5-Inch Sanding Disc Kit, 114 Pieces (40–1000 Grit)














Pomsare 114PCS 5 Inch Angle Grinder Sanding Disc Kit: A Complete Sanding Setup for Grinder and Drill Users
Angle grinders are powerful tools, but their standard role is cutting and grinding rather than fine surface work. The Pomsare 114PCS 5 Inch Angle Grinder Sanding Disc Kit is built around a simple idea: with the right backing pad and a supply of hook-and-loop discs, a grinder can take on sanding and polishing tasks as well. The kit bundles a backing pad, a foam buffering pad, a drill screw, an instruction manual, and a broad assortment of sanding discs in grits from 40 up to 1000, giving users a single package to cover both aggressive material removal and finer finishing work.
Design and Build Quality
The centerpiece of the kit is the 5-inch (125mm) upgraded hook-and-loop backing pad. According to the product information, this pad is reinforced and described as more durable than standard versions. It is designed to hold hook-and-loop sanding paper securely while allowing discs to be removed and swapped easily. That hook-and-loop design matters in practice because it means you are not relying on adhesives or separate fastening methods to keep each disc in place — the disc simply presses onto the pad and peels off when you are done.
Alongside the backing pad, the kit includes two 10mm foam buffering pads. These soft, flexible sponge pads are described as reducing tool vibration, enhancing abrasive cutting, and helping with tight edge polishing. They also serve a protective function, shielding the backing pad itself. Because they are flexible, they are noted as being well suited to polishing uneven surfaces, where a rigid pad might not follow the contours of the material as readily.
The backing pad connects to an angle grinder spindle via 5/8-11 threads, screwing on directly. A drill screw is also included, which allows the backing pad to be connected to a standard power drill. This dual compatibility is one of the more practical aspects of the kit, since it means the same sanding setup can potentially be used across two different tools depending on the task at hand.
Features and Technology
The most significant feature here is the grit range. The kit includes 110 sanding discs in total, with 10 pieces each of 40, 60, 80, 120, 180, 240, 320, 400, 600, 800, and 1000 grit. That spread covers a wide arc of work: the lower grits handle rougher shaping and material removal, while the higher grits move toward finer finishing and polishing. Having ten discs at each grit level means users can work through a sequence of progressively finer abrasives without running out of a particular grade immediately.
The discs themselves are described as suitable for grinding and finishing on metals, woods, plastics, glass, and other materials. The product information also notes that the kit works aggressively on wood, metal, and stone. It is worth noting that the source describes the kit as cost-effective and time-saving, and states that the angle grinder polishing wheel outperforms random orbit sanders for aggressive sanding. These are stated product claims rather than independently verified results, but they indicate the intended positioning of the kit as a faster option for heavier sanding work.
The kit also includes an instruction manual, which is helpful given that the setup involves assembling a backing pad onto a tool and selecting appropriate grits for a given task.
Performance and Everyday Experience
In practical terms, the value of this kit lies in how it changes what a grinder can do. A standard angle grinder with a grinding wheel is not designed for surface finishing. By attaching the hook-and-loop backing pad, the tool becomes a sander capable of accepting a range of abrasive discs. The hook-and-loop system makes disc changes quick, which is useful when moving through grits during a project — for example, starting coarse to remove material and then stepping up to finer grits for a smoother result.
The foam buffering pads add another layer of capability. Because they are soft and flexible, they can help when working on uneven surfaces or when polishing edges, where a firmer setup might struggle to make consistent contact. The stated reduction in vibration is also relevant for control, since vibration can affect how precisely a tool is guided.
The product information includes an important operational note: users are advised not to work at high speeds without interruption, and a recommended RPM range of 3000–4000 is specified. This is a meaningful detail, because it suggests the kit is intended for controlled use within a particular speed range rather than continuous high-speed operation. Following that guidance is part of using the kit as intended.
Connectivity and Compatibility
The backing pad is designed to screw directly onto an angle grinder spindle with 5/8-11 threads, which is a common spindle size for many grinders. The included drill screw allows the same backing pad to be mounted on a standard power drill, expanding the range of tools the kit can work with. This means someone who owns a grinder but wants finer control for certain tasks, or someone who owns a drill and wants sanding capability without buying a dedicated sander, can potentially use the same set of discs and pads.
It is worth noting that the product information lists the drill screw as 8mm in one section and refers to a 10mm foam buffering pad separately — these are distinct components, and the drill attachment is described as suitable for standard power drills. The exact fit will depend on the tool in question, so checking compatibility before use is sensible.
Who Is This Product Best For?
This kit suits people who already own an angle grinder and want to add sanding and polishing capability without purchasing a separate sander. It is also relevant for those who own a power drill and want a sanding attachment that can be mounted via the included drill screw. The broad grit range from 40 to 1000 makes it appropriate for general workshop tasks involving wood, metal, plastic, glass, and similar materials, as stated in the product information.
It is likely to appeal to woodworkers, carvers, and crafters who need to move between rough shaping and finer finishing, as well as to anyone doing general grinding and finishing work on mixed materials. Because the kit includes multiple discs at each grit, it is also practical for people who expect to work through several projects before needing to restock a particular grade.
Final Verdict
The Pomsare 114PCS 5 Inch Angle Grinder Sanding Disc Kit is a practical, well-rounded assortment for turning a grinder into a sander. The reinforced hook-and-loop backing pad, the two foam buffering pads, and the eleven grit levels from 40 to 1000 give users a broad working range in one package. The ability to mount the backing pad on either a grinder or a drill adds flexibility, and the inclusion of an instruction manual supports setup.
The kit does come with a stated speed recommendation of 3000–4000 RPM and a caution against uninterrupted high-speed use, so it is not a fit-and-forget accessory — it requires some attention to how it is operated. For anyone who wants a single kit covering coarse removal through finer finishing, and who is prepared to work within the recommended parameters, this set offers a straightforward way to expand what their existing tools can do.